Daxun is an experienced manufacturer of CP-2 grade titanium tubes
En tant que principal fournisseur de tubes en titane et en alliage de titane en Chine, Daxun fournit des tubes en titane de haute performance au monde entier.
- Titanium pipe/tube Grade：CP-2（Niveau 2）- UNS R50400-3.7035
- Titanium tube types: Seamless Ti tube, Ti welded tube, forged Ti tube
- Titanium tubes density The density of grade 2 titanium is 4.51 g/cm3
- Standards: ASTM B861、B862、B338 / ASME SB861、SB862、SB338
- High strength, very corrosion resistant, good cold formability
----Daxun produit des tubes en titane en Chine pour répondre aux besoins divers et -- exigeants des clients！.
A global leader in commercially pure titanium tubes fabrication services
Buy Grade 2 Titanium Tubes from Daxun; we can offer you a wide range of sizes, starting from 1.0 mm diameter, in a wide variety, either directly from stock or custom made to your specifications. We can immediately provide drawn, seamless rolled or longitudinally welded tubes for a variety of applications from stock. We sell welded or seamless tubes made of Grade 2 Titanium to typical specifications for heat exchangers such as ASTM B 338, ASME SB 338, DIN and VD TÜV.
Our CP Grade 2 tubes have a density of 4.51 g/cm3, which is 45% lower than ferrous alloys. It is a medium-strength alloy with a typical yield strength of 352 MPa. The alloy has good ductility, formability and welding properties. The addition of iron and oxygen improves strength and formability. CP Grade 2 exhibits similar performance qualities to Grade 1, including excellent corrosion resistance under oxidizing conditions. However, this titanium tube is stronger than Grade 1 titanium tube.
Grade 2 Titanium Tubes are commercially pure titanium with a good balance between strength and ductility. The material has good toughness. It is the most commonly used titanium alloy due to its high strength, weldability and corrosion resistance. Its high ductility and formability make it the alloy of choice for piping systems, heat exchangers, reaction and pressure vessels, and flue gas desulfurization systems. Grade 2 titanium alloys are used in a variety of industries, including chemical processing, petrochemical processing, aerospace and marine.
Are you looking to purchase titanium tubes for your project or order a range of tubes? Daxun produces a wide range of titanium tubes including Grade 1 (3.7025), Grade 2 (3.7035), Grade 3 (3.7055), Grade 7 (3.7235), Grade 9 (3.7195) and Grade 12 (3.7105).
Buy titanium tubes at Daxun Alloys.
We offer a wide range of sizes starting from 1.0 mm in diameter with multiple variations, available directly from stock or custom made to your specifications through our network. We have wrought titanium tubes, seamless titanium tubes and longitudinally welded titanium tubes immediately available from stock for a wide range of applications.
We offer heat exchanger tubing in standard specifications such as ASTM B 338, ASME SB 338, DIN 17866 and VD TÜV welded titanium tubes or seamless titanium tubes. When it comes to titanium tubes, we have a large supply of titanium welded tubes and titanium seamless tubes in China in standard sizes up to 100 mm thick. We will supply welded titanium tubes for larger pipe sizes. The most common specifications used in the industry are ASTM B 861, ASFM B 862, NACE and NORSOK and VD TÜV Tube 230/2, depending on the specifications of the plant designer.
Titanium tube surface treatment options include bright annealing, pickling and grinding. Material parameters vary depending on the application and product requirements. The corrosion and mechanical properties of titanium alloy tubes vary. We are happy to assist you in evaluating your needs. If you have a long-term supply commitment, you can establish a framework agreement with Daxun. We guarantee price and quantity for a specified period.
Données
- Paramètres
- Ingrédient
- Propriétés mécaniques
| Grade 2 Titanium pipe & Tubes Specification | ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862 |
| Grade 2 Titanium pipe & Tubes Grades | Commercially pure titanium Grade 2- TA2- USN 50400 |
| Grade 2 Titanium pipe & Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
| Grade 2 Titanium pipe & Tubes Outer Diameter Size | Titanium seamless pipe – φ1.0mm to φ508.3mm |
| Titanium welded pipe – φ1.0mm to φ1219mm | |
| Grade 2 Titanium pipe & Tubes Wall Thickness | 1.0mm—50mm (customizable wall thickness) |
| Grade 2 Titanium pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| Titanium pipe Form TA2 | ‘ Hollow, U’ bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc |
| Marking TA2 3.7035 | All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer’s request.) |
| Uses of Titanium Alloy Tubes | Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes. |
| Grade 2 Titanium pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
| Grade 2 Titanium pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| Grade 2 Titanium pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Grade 2 Titanium pipe & Tubes Other Testing | ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc. |
| Grade 2 Titanium pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| Grade 2 Titanium pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Grade 2 Titanium pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Grade 2 Titanium pipe & Tubes Shipment & Transportation | By Road – Truck / Train, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes |
| Grade 2 Titanium pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
| Élément | Poids % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Restant |
| Alliage | Désignation UNS | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Grain Size Requirement | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | ||||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | — | — | 16 | 5.1 | 144 |
| 50,000 | ||||||||||||||
Choisissez Daxun pour faire décoller votre projet.
Production avancée : tube sans soudure en titane
- Grade 2 titanium seamless pipes are hot rolled or hot extruded, straightened, processed with inner and outer diameters, and surface etched. The pipes can be supplied in heat-treated or non-heat-treated forms. Daxun has 100% ultrasonic flaw detection capabilities. Hot rolled pipe/hot extruded titanium seamless pipe: outer diameter 1.0mm to 325mm, wall thickness 0.3mm to 50mm, length up to 12000mm. Cold rolled titanium seamless pipe: cold processed pipes are supplied after heat treatment, surface etching, water pressure test or ultrasonic flaw detection according to manufacturing specifications. Outer diameter 6mm to 102mm, wall thickness 0.5mm to 20mm, length up to 9000mm.
(The above is agreed upon by the manufacturer and the customer based on the specific situation)
Grade 2 Titanium Tube Features
Daxun’s Grade 2 Titanium Tube has medium strength and excellent cold forming properties. It has excellent welding properties and has excellent resistance to oxidation and corrosion.
- High Strength Titanium Alloy
- Excellent Cold Formability
- Excellent Weldability
- Excellent High Oxidation Resistance
- We stock and sell this grade of Grade 2 Titanium Tube, Titanium Welded Tube, Titanium Seamless Tube, Pipe Fittings, Forged Seamless Tube.
Production avancée： Tube soudé en titane
Grade 2 Titanium Welded Tube: Diameter ranges from 6.0mm to 1219mm, wall thickness ranges from 0.3mm to 30mm (depending on diameter), lengths up to 25000mm, made from Gr1 titanium tube. Welded tubes are made from flat rolled billets (tube blanks) on electric tube welding machines using automatic tungsten inert gas (argon) welding, and heat treated on the mill line. Mechanical tests, geometric measurements, 100% ultrasonic and eddy current testing, pneumatic or hydrostatic testing are performed before the finished titanium welded tubes are packaged according to customer specifications. Manufacturing technology as well as inspection and testing equipment ensure that thin wall welded tubes meet ASTM B 338 and ASME SB 338 specifications.
Rapports d'essais
The test reports we provide include: Factory test certificate for Grade 2 Titanium Welded Pipe and Grade 2 Titanium Seamless Pipe, EN 10204 3.1, Chemical Report, Mechanical Report, PMI Test Report, Visual Inspection Report, Third Party Inspection Report, NABL approved laboratory report, Destructive Test Report, Non-destructive Testing Report. (DaXun will provide according to customer requirements)
Applications et normes
Grade 2 titanium tubes are widely used in the following industries under extreme corrosive conditions:
- Chemical processing parts such as heat exchangers, reaction vessels, evaporators and transmission pipelines, automobile exhaust, oil and gas industry, petrochemical plants, chemical plants, industrial machinery, power industry, paper and pulp industry, food processing industry, refineries, pharmaceutical and food processing equipment, etc.
- Spécifications : ASTM B861, B862, B338 / ASME SB861, SB862, SB338
- Standards: ASTM, ASME, GB, GJB, API
Qualité, livraison, inspection
Daxun performs several quality assurance tests, these tests include flattening test, flaring test, ultrasonic flaw detection test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the Grade 2 Titanium Welded Tube and Grade 2 Titanium Seamless Tube materials are suitable for the required application. During the production process, we measure the diameter, thickness and surface of the products. Our standard delivery time is 5-7 days and the delivery time for special size products is 15-20 days.
- Nos délais de livraison sont strictement conformes au contrat.
- Aider les agences tierces des clients à se rendre à l'usine pour l'inspection
- Prise en charge d'échantillons gratuits pour les essais des clients
- Soutien à l'inspection sur site ou à l'inspection vidéo en usine
Emballage
Daxun Alloy garantit la meilleure qualité d'emballage, car celui-ci joue un rôle important dans le fret international, où les marchandises passent par différents canaux avant d'atteindre leur destination finale ; nous accordons donc une attention particulière à l'emballage. Nous emballons nos marchandises de différentes manières, en fonction du produit. Nous emballons nos produits de différentes manières, notamment :
- Boîtes et caisses
- Emballage rétractable
- Palettes en bois
- Boîtes en bois
Support technique
Si vous avez besoin d'une assistance technique supplémentaire, notre métallurgiste résident et notre personnel compétent se feront un plaisir de vous aider. En outre, Daxun dispose d'un laboratoire d'essai certifié, une première dans l'industrie des stocks multimétaux et plastiques. Ceci, à notre avis, démontre notre dévouement inébranlable à la qualité et notre philosophie en tant que fournisseur de services complets.
Grade 2Titanium TUBE Features
Daxun Grade 2 Titanium TUBE Let your brand improve rapidly
- Galerie
- Titanium pipe/tube
- Surface
- Types of
| Apart from the products listed below, other available metal products are not listed here. Other metal products DAXUN can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube. | |
| Norme relative aux produits/transformations | Qualité/taille |
| Titanium Plate, Sheet, Coil— ASME SB265, AMS 4911, AMS 4919, AMS 4914，ASTM F67, ASTM F136 | GR1, GR2, GR3, GR4, GR5, GR7,GR9, GR12, GR16, GR17, GR23,Ti-6Al-4V ELI, Ti-6-2-4-2, Ti-15-3-3-3(Epaisseur :( 0.0197”-6”)Largeur maximale : 12 pieds,Longueur maximale : 50 pieds) |
| AMS-T-9046 | |
| Titanium and Titanium alloy pipe/tube | |
| Titane commercialement pur (CP) | |
| Désignation du code | Limite d'élasticité |
| minimum, ksi 1 / | |
| CP-1 | 70 |
| CP-2 | 55 |
| CP-3 | 40 |
| CP-4 | 25 |
| Alliages de titane alpha(A) | |
| Désignation du code | Composition |
| A-1 | 5A1-2,5Sn |
| A-2 | 5A1-2,5Sn(ELI) 2 / |
| A-3 | 6A1-2Cb-1Ta-0,8Mo |
| A-4 | 8A1-1Mo-1V |
| Alliages de titane alpha-bêta (AB) | |
| Désignation du code | Composition |
| AB-1 | 6A1-4V |
| AB-2 | 6A1-4V(ELI) |
| AB-3 | 6A1-6V-2Sn |
| AB-4 | 6A1-2Sn-4Zr-2Mo |
| AB-5 | 3A1-2,5V |
| AB-6 | 8Mn |
| Alliages de titane bêta(B) | |
| Désignation du code | Composition |
| B-1 | 13V-11Cr-3A1 |
| B-2 | 11,5Mo-6Zr-4,5Sn |
| B-3 | 3A1-8V-6Cr-4Mo-4Zr |
| B-4 | 8Mo-8V-2Fe-3A1 |
| Traitement : | |
| Laminage à chaud | Laminage à froid |
| Classes disponibles : | |
| CP grade 1 | Grade 6Al-2Sn-4Zr-2Mo (6-2-4-2) |
| CP grade 2 | Grade 6Al-4V ELI (anciennement grade 23) |
| 7e année | Grade 6Al-6V-2Sn (6-62) |
| 19e année | Grade 8Al-1Mo-1V (8-1-1) |
| Grade 5 (6Al-4V) | 9e année (3Al-2,5V) |
| Grade 6 (5Al-2.5Sn) | CP grade 3 |
| Application | |
| Industrie chimique | Dessalement de l'eau de mer |
| Industrie pétrochimique | Aérospatiale |
| Domaine de l'usinage, domaine de l'automobile | Téléphone mobile Champ des composants. |
| urface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| Titanium Grade 2 Seamless Pipe | Titanium DIN 3.7035 Seamless Pipe |
| Titanium UNS R50400 Seamless Pipe | |
| Titanium Grade 2 Seamless Pipes | |
| Titanium Alloy Gr.2 Seamless Pipe | |
| ASTM B337 Titanium Grade 2 Seamless Pipe | |
| ASME SB337 Ti Alloy Gr.2 Seamless Pipes | |
| Titanium Grade 2 Welded Pipe | Titanium DIN 3.7035 Welded Pipe |
| Titanium UNS R50400 Welded Pipe | |
| Titanium Grade 2 Welded Pipes | |
| Titanium Alloy Gr.2 Welded Pipe | |
| ASTM B337 Titanium Grade 2 Welded Pipes | |
| ASME SB337 Ti Alloy Gr.2 Welded Pipes | |
| Titanium Grade 2 Round Pipe | Titanium DIN 3.7035 Round Pipe |
| Titanium UNS R50400 Round Pipes | |
| Titanium Grade 2 Round Pipes | |
| Titanium Alloy Gr.2 Round Pipe | |
| Titanium Grade 2 Round Pipe | |
| Ti Alloy Gr.2 Round Pipes | |
| Titanium Gr.2 Seamless Tubes | Titanium DIN 3.7035 Seamless Tubes |
| Titanium UNS R50400 Seamless Tubes | |
| Titanium Grade 2 Seamless Tubing | |
| Titanium Alloy Gr.2 Seamless Tubes | |
| ASTM B338 Titanium Gr.2 Seamless Tubing | |
| ASME SB338 Ti Alloy Grade 2 Seamless Tubes | |
| Titanium Grade 2 Welded Tubes | Titanium DIN 3.7035 Welded Tubes |
| Titanium UNS R50400 Welded Tubes | |
| Titanium Grade 2 Welded Tubing | |
| Titanium Alloy Gr.2 Welded Tubes | |
| ASTM B338 Titanium Grade 2 Welded Tubing | |
| ASME SB338 Ti Alloy Gr.2 Welded Tubes | |
| Titanium Grade 2 Round Tubes | Titanium DIN 3.7035 Round Tubes |
| Titanium UNS R50400 Round Tubes | |
| Titanium Grade 2 Round Tubing | |
| Titanium Alloy Gr.2 Round Tubes | |
| Titanium Grade 2 Round Tubing | |
| Ti Alloy Gr.2 Round Tubes | |
| Titanium Grade 2 Pipe | Titanium DIN 3.7035 Pipe |
| Titanium UNS R50400 Pipes | |
| Titanium Grade 2 Pipe | |
| Titanium Alloy Gr.2 Pipes | |
| Titanium Grade 2 Pipes | |
| Ti Alloy Gr.2 Pipe | |
| Titanium Grade 2 Tube | Titanium DIN 3.7035 Tubes |
| Titanium UNS R50400 Tube | |
| Titanium Grade 2 Tubing | |
| Titanium Alloy Gr.2 Tubes | |
| Titanium Grade 2 Tubes | |
| Ti Alloy Gr.2 Tubes |
Grade 2 titanium tube form (4)
-
Titanium seamless pipe is made by perforating and drawing solid titanium rod, and the hollow part of the pipe is made by perforation or hot extrusion process. Titanium seamless pipe is an ideal choice for very large diameter to wall thickness ratio and has very good external dimension tolerance.
-
Le tube soudé en titane est un produit tubulaire fabriqué à partir de bandes de titane formées par laminage et soudées par fusion le long du joint longitudinal. Le procédé de soudage utilisé par Daxun Alloy n'utilise pas de métal d'apport pendant le processus de soudage.
-
Les tubes carrés en titane sont étirés à partir de tubes ronds ou de billettes de tubes ronds et peuvent être formés en angles droits ou arrondis. Ils peuvent également être extrudés à froid, ce qui est efficace et peu coûteux. Le seul inconvénient est que la tolérance augmente progressivement.
-
Tubular products are welded and then re-drawn to final size. Welding and drawing is ideal for producing thick walled, large diameter tubes that cannot be welded directly to size but still offer cost savings over seamless tubes. All Daxun welded and drawn tubes are bright annealed
Informations disponibles pour référence et téléchargement
Daxun is a trustworthy Titanium pipe/tube manufacturer
As a professional manufacturer, Daxun ensures superior quality across all its products. Consequently, all our titanium tubes have obtained certifications under multiple international quality standards, including ISO9001, SGS, CE, and OQC.
Projets et produits récents
Produits apparentés (8)
Grade 2 Titanium Tube (UNS R50400 / Werkstoff WS 3.7035)
This is the most often used titanium tube for industrial applications, providing a superb balance of moderate strength and reasonable ductility. It offers excellent corrosion resistance in both highly oxidising and slightly reducing conditions (including chlorides). It provides good corrosion protection in the chemical and offshore industries, as well as aircraft manufacture, where strength and ease of forming are required. It’s also utilised in heat exchangers, hypochlorite systems, fire water systems, ballast water systems, industrial and aerospace components, CPI equipment, and pipes.
Fabrication
Stock Availability
Weight Reduction
Crystal Structure
Grade 2 Titanium Seamless Pipe Manufacturing Process
Grade 2 Titanium Welded Pipe Manufacturing Process
Power Industry Reference List
| Entreprise | Project |
|---|---|
| Alstom Power | Calpine Fox Energy |
| Alstom Power | Skikda |
| The Atlantic Group | Savannah Electric Power Kraft #2 |
| Constellation Power | Wagner Station Unit #2 |
| Ecolaire/Yuba Heat Transfer | Connectiv Energy |
| Ellet Industries | — |
| Graham Corp | — |
| Hantech | — |
| High Performance Tube | — |
| Joseph Oat | BP Chemical |
| Larsen & Toubro | TATA Power — UMPP Mundra |
| Salem Tube | — |
| The Atlantic Group | Savannah Electric Power Kraft #2 |
| Tico Titanium | — |
| Titan Metal Fab | BP Chemical |
| Titanium Fabricators | — |
| Tubes Inc. | — |
| Uniti Titanium | — |
| Waterco | — |
| Waterpik Technologies | — |
Our services
- We customise your grade 2 titanium tubes to your specifications, certify them with various certifying organisations (e.g., TÜV Rheinland or DNV), and begin upgrading titanium semi-finished products for the corresponding applications.
- We will be delighted to advise and explain what you need to know when obtaining titanium tubes, as well as which criteria you should pay particular attention to while producing the components.
- If you have long-term delivery responsibilities, you can enter into a framework agreement with Daxun. We guarantee prices and quantities within specified dates.
- Benefit from our extensive knowledge in the worldwide procurement industry. Since 2001, we have served small, medium-sized, and large businesses at home and abroad.
- Have you got any questions? Our service centre would be delighted to answer any queries you have about finished titanium tubes and unusual materials. We look forward to hearing from you.
La qualité de l'alliage de titane dont vous avez besoin dépend du projet sur lequel vous travaillez, car chaque qualité présente des avantages différents.
Toutes les qualités d'alliage de titane sont extrêmement solides et résistantes à la corrosion, ce qui signifie qu'elles continueront à fonctionner dans les conditions les plus difficiles.
Les grades supérieurs d'alliage de titane (5-12) sont des alliages conçus pour des avantages spécifiques. Par exemple, l'alliage de titane de grade 12 présente une excellente résistance à la chaleur, ce qui en fait un choix parfait pour les échangeurs de chaleur à calandre et à tube, les tuyauteries hydrauliques et les équipements de l'industrie chimique.
Les grades 1 à 4 sont des alliages de titane pur et constituent un choix idéal si vous avez besoin d'un matériau ductile et soudable pour les systèmes de tuyauterie et les tubes. Les grades inférieurs sont utilisés dans la marine et l'industrie.
Si vous démarrez un projet et que vous ne savez pas quelle qualité d'alliage de titane vous convient le mieux, contactez-nous dès aujourd'hui ; nous nous ferons un plaisir de vous aider.
Chez DAXUN, nous proposons une large gamme d'alliages de titane allant de la nuance 1 à la nuance 12.
Les grades 1 à 4 sont du titane pur, tandis que les grades supérieurs sont des alliages.
Les alliages sont appréciés pour leur rapport résistance/poids élevé.
La nuance d'alliage de titane la plus couramment utilisée est la nuance 5. Bien qu'elle soit encore riche en titane, cette nuance est l'une des plus fiables car elle peut résister à des températures allant jusqu'à 600°F et à des conditions extrêmes.
Les qualités supérieures sont privilégiées par les industries telles que l'aérospatiale et la marine pour leur résistance à l'usure et à la corrosion.
Inversement, les qualités inférieures sont principalement utilisées pour le soudage en raison de leur faible résistance.
Pour en savoir plus sur les différences entre les différents grades d'alliage de titane, appelez +86 13382898899 aujourd'hui pour parler directement à nos experts.
Bien que la qualité du titane augmente légèrement le coût, le coût total est principalement déterminé par la forme du titane dont vous avez besoin.
At DAXUN, we offer a wide range of titanium products, including pipe/tubes, tubes, coils and bars. The length, width and quantity of each item you require will affect the amount you pay at checkout.
Malheureusement, il est difficile d'établir un prix en ligne sans en savoir plus sur votre projet et sur l'utilisation du titane.
Heureusement, notre équipe d'experts est toujours là pour vous aider et vous conseiller dans vos besoins en titane. En envoyant un e-mail à [email protected], nous pourrons vous donner des conseils et un devis précis.
Veillez à inclure autant d'informations que possible sur le grade, la forme et la quantité de titane dont vous avez besoin afin d'obtenir une meilleure compréhension de vos besoins.
L'équipe de DAXUN est expérimentée, compétente et sympathique. Forte de ses années d'expérience dans l'industrie, elle connaît parfaitement le titane, notamment ses utilisations, ses avantages et ses qualités.
Pour des mises à jour régulières sur le titane, ses utilisations et ses applications dans tous les secteurs, ne manquez pas de consulter notre blog. Nos experts ont rédigé des guides faciles à suivre auxquels vous pouvez toujours vous référer lorsque vous avez des questions.
Si vous rencontrez encore des difficultés, n'hésitez pas à nous contacter, nous nous ferons un plaisir de vous aider.
En envoyant un courriel à [email protected], vous recevrez une réponse rapide. Veillez à donner le plus de détails possible dans votre question afin que nous puissions vous recommander une solution adaptée.
Veuillez remplir le formulaire de la page “Contactez-nous” ou appeler notre responsable des ventes au “+86 13382898899”, nous vous contacterons dans les plus brefs délais. Notre WhatsApp est en ligne, et l'email ([email protected]) sera vérifié dans les 6 heures. Chaque demande ou message recevra une réponse rapide. En outre, nous partageons chaque semaine des informations sur le marché avec nos clients
We can provide stainless steel pipe/tube samples for you to check the quality. Sample is free and you just pay the freight.
Nous avons exporté vers plus de 42 pays, tels que le Canada, le Chili, le Koweït, l'Allemagne, la Corée du Sud, l'Arabie saoudite, Singapour, etc.
Our MOQ is 1 ton for stainless steel pipe/tube.
Les commandes d'essai peuvent être livrées dans un délai d'une semaine. Pour les commandes régulières, il faut compter environ deux semaines.