Daxun is an experienced manufacturer of CP-2 grade titanium tubes
As a leading supplier of titanium and titanium alloy tubes in China, Daxun provides high-performance titanium tubes to the world.
- Titanium pipe/tube Grade：CP-2（الصف 2）- UNS R50400-3.7035
- Titanium tube types: Seamless Ti tube, Ti welded tube, forged Ti tube
- Titanium tubes density The density of grade 2 titanium is 4.51 g/cm3
- Standards: ASTM B861、B862、B338 / ASME SB861、SB862、SB338
- High strength, very corrosion resistant, good cold formability
————Daxun produces titanium tubes in China to meet the diverse and ——demanding needs of customers！
A global leader in commercially pure titanium tubes fabrication services
Buy Grade 2 Titanium Tubes from Daxun; we can offer you a wide range of sizes, starting from 1.0 mm diameter, in a wide variety, either directly from stock or custom made to your specifications. We can immediately provide drawn, seamless rolled or longitudinally welded tubes for a variety of applications from stock. We sell welded or seamless tubes made of Grade 2 Titanium to typical specifications for heat exchangers such as ASTM B 338, ASME SB 338, DIN and VD TÜV.
Our CP Grade 2 tubes have a density of 4.51 g/cm3, which is 45% lower than ferrous alloys. It is a medium-strength alloy with a typical yield strength of 352 MPa. The alloy has good ductility, formability and welding properties. The addition of iron and oxygen improves strength and formability. CP Grade 2 exhibits similar performance qualities to Grade 1, including excellent corrosion resistance under oxidizing conditions. However, this titanium tube is stronger than Grade 1 titanium tube.
Grade 2 Titanium Tubes are commercially pure titanium with a good balance between strength and ductility. The material has good toughness. It is the most commonly used titanium alloy due to its high strength, weldability and corrosion resistance. Its high ductility and formability make it the alloy of choice for piping systems, heat exchangers, reaction and pressure vessels, and flue gas desulfurization systems. Grade 2 titanium alloys are used in a variety of industries, including chemical processing, petrochemical processing, aerospace and marine.
Are you looking to purchase titanium tubes for your project or order a range of tubes? Daxun produces a wide range of titanium tubes including Grade 1 (3.7025), Grade 2 (3.7035), Grade 3 (3.7055), Grade 7 (3.7235), Grade 9 (3.7195) and Grade 12 (3.7105).
Buy titanium tubes at Daxun Alloys.
We offer a wide range of sizes starting from 1.0 mm in diameter with multiple variations, available directly from stock or custom made to your specifications through our network. We have wrought titanium tubes, seamless titanium tubes and longitudinally welded titanium tubes immediately available from stock for a wide range of applications.
We offer heat exchanger tubing in standard specifications such as ASTM B 338, ASME SB 338, DIN 17866 and VD TÜV welded titanium tubes or seamless titanium tubes. When it comes to titanium tubes, we have a large supply of titanium welded tubes and titanium seamless tubes in China in standard sizes up to 100 mm thick. We will supply welded titanium tubes for larger pipe sizes. The most common specifications used in the industry are ASTM B 861, ASFM B 862, NACE and NORSOK and VD TÜV Tube 230/2, depending on the specifications of the plant designer.
Titanium tube surface treatment options include bright annealing, pickling and grinding. Material parameters vary depending on the application and product requirements. The corrosion and mechanical properties of titanium alloy tubes vary. We are happy to assist you in evaluating your needs. If you have a long-term supply commitment, you can establish a framework agreement with Daxun. We guarantee price and quantity for a specified period.
البيانات
- المعلمة
- المكونات
- الخواص الميكانيكية
| Grade 2 Titanium pipe & Tubes Specification | ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862 |
| Grade 2 Titanium pipe & Tubes Grades | Commercially pure titanium Grade 2- TA2- USN 50400 |
| Grade 2 Titanium pipe & Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
| Grade 2 Titanium pipe & Tubes Outer Diameter Size | Titanium seamless pipe – φ1.0mm to φ508.3mm |
| Titanium welded pipe – φ1.0mm to φ1219mm | |
| Grade 2 Titanium pipe & Tubes Wall Thickness | 1.0mm—50mm (customizable wall thickness) |
| Grade 2 Titanium pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| Titanium pipe Form TA2 | ‘ Hollow, U’ bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc |
| Marking TA2 3.7035 | All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer’s request.) |
| Uses of Titanium Alloy Tubes | Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes. |
| Grade 2 Titanium pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
| Grade 2 Titanium pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| Grade 2 Titanium pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Grade 2 Titanium pipe & Tubes Other Testing | ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc. |
| Grade 2 Titanium pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| Grade 2 Titanium pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Grade 2 Titanium pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Grade 2 Titanium pipe & Tubes Shipment & Transportation | By Road – Truck / Train, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes |
| Grade 2 Titanium pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
| العنصر | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| في | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| تي | Remaining |
| Alloy | تسمية نظام الأمم المتحدة | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Grain Size Requirement | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | ||||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | — | — | 16 | 5.1 | 144 |
| 50,000 | ||||||||||||||
اختر Daxun لمساعدة مشروعك على الانطلاق.
Advanced Production:Titanium seamless pipe
- Grade 2 titanium seamless pipes are hot rolled or hot extruded, straightened, processed with inner and outer diameters, and surface etched. The pipes can be supplied in heat-treated or non-heat-treated forms. Daxun has 100% ultrasonic flaw detection capabilities. Hot rolled pipe/hot extruded titanium seamless pipe: outer diameter 1.0mm to 325mm, wall thickness 0.3mm to 50mm, length up to 12000mm. Cold rolled titanium seamless pipe: cold processed pipes are supplied after heat treatment, surface etching, water pressure test or ultrasonic flaw detection according to manufacturing specifications. Outer diameter 6mm to 102mm, wall thickness 0.5mm to 20mm, length up to 9000mm.
(The above is agreed upon by the manufacturer and the customer based on the specific situation)
Grade 2 Titanium Tube Features
Daxun’s Grade 2 Titanium Tube has medium strength and excellent cold forming properties. It has excellent welding properties and has excellent resistance to oxidation and corrosion.
- High Strength Titanium Alloy
- Excellent Cold Formability
- Excellent Weldability
- Excellent High Oxidation Resistance
- We stock and sell this grade of Grade 2 Titanium Tube, Titanium Welded Tube, Titanium Seamless Tube, Pipe Fittings, Forged Seamless Tube.
Advanced Production： Titanium Welded Tube
Grade 2 Titanium Welded Tube: Diameter ranges from 6.0mm to 1219mm, wall thickness ranges from 0.3mm to 30mm (depending on diameter), lengths up to 25000mm, made from Gr1 titanium tube. Welded tubes are made from flat rolled billets (tube blanks) on electric tube welding machines using automatic tungsten inert gas (argon) welding, and heat treated on the mill line. Mechanical tests, geometric measurements, 100% ultrasonic and eddy current testing, pneumatic or hydrostatic testing are performed before the finished titanium welded tubes are packaged according to customer specifications. Manufacturing technology as well as inspection and testing equipment ensure that thin wall welded tubes meet ASTM B 338 and ASME SB 338 specifications.
تقارير الاختبار
The test reports we provide include: Factory test certificate for Grade 2 Titanium Welded Pipe and Grade 2 Titanium Seamless Pipe, EN 10204 3.1, Chemical Report, Mechanical Report, PMI Test Report, Visual Inspection Report, Third Party Inspection Report, NABL approved laboratory report, Destructive Test Report, Non-destructive Testing Report. (DaXun will provide according to customer requirements)
Applications and standards
Grade 2 titanium tubes are widely used in the following industries under extreme corrosive conditions:
- Chemical processing parts such as heat exchangers, reaction vessels, evaporators and transmission pipelines, automobile exhaust, oil and gas industry, petrochemical plants, chemical plants, industrial machinery, power industry, paper and pulp industry, food processing industry, refineries, pharmaceutical and food processing equipment, etc.
- Specifications: ASTM B861, B862, B338 / ASME SB861, SB862, SB338
- Standards: ASTM, ASME, GB, GJB, API
الجودة والتسليم والتفتيش
Daxun performs several quality assurance tests, these tests include flattening test, flaring test, ultrasonic flaw detection test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the Grade 2 Titanium Welded Tube and Grade 2 Titanium Seamless Tube materials are suitable for the required application. During the production process, we measure the diameter, thickness and surface of the products. Our standard delivery time is 5-7 days and the delivery time for special size products is 15-20 days.
- وقت التسليم لدينا يتوافق تمامًا مع العقد.
- دعم الوكالات الخارجية للعملاء للذهاب إلى المصنع للفحص
- دعم العينات المجانية لاختبار العملاء
- دعم الفحص الموقعي أو فحص المصنع بالفيديو
التعبئة والتغليف
تضمن شركة Daxun Alloy أفضل جودة للتغليف لأنها تلعب دورًا مهمًا في الشحن الدولي حيث تمر البضائع عبر قنوات مختلفة للوصول إلى الوجهة النهائية، لذلك نولي اهتمامًا خاصًا بالتغليف. نقوم بتغليف بضائعنا بعدة طرق حسب المنتج. نقوم بتغليف منتجاتنا بعدة طرق مثل:
- الصناديق والصناديق
- الغلاف المنكمش
- منصات خشبية
- صناديق خشبية
الدعم الفني
إذا كنت بحاجة إلى أي مساعدة فنية إضافية، فسيكون من دواعي سرور أخصائي المعادن المقيم لدينا وموظفينا المطلعين تقديم المساعدة. بالإضافة إلى ذلك، تفتخر Daxun بوجود مختبر اختبار معتمد - وهو الأول من نوعه في صناعة مخزون المعادن المتعددة والبلاستيك. وهذا، في رأينا، يدل على تفانينا الثابت للجودة وفلسفتنا كمورد متكامل الخدمات.
Grade 2Titanium TUBE Features
Daxun Grade 2 Titanium TUBE Let your brand improve rapidly
- معرض الصور
- Titanium pipe/tube
- السطح
- Types of
| Apart from the products listed below, other available metal products are not listed here. Other metal products DAXUN can manufacture and supply include Tantalum, Niobium, Zirconium, Hafnium, Nickel, Copper etc., which are mainly in the form of Plate, Bar and Tube. | |
| Products/Processing Standard | Grade/Size |
| Titanium Plate, Sheet, Coil— ASME SB265, AMS 4911, AMS 4919, AMS 4914，ASTM F67, ASTM F136 | GR1, GR2, GR3, GR4, GR5, GR7,GR9, GR12, GR16, GR17, GR23,Ti-6Al-4V ELI, Ti-6-2-4-2, Ti-15-3-3-3(Thickness:( 0.0197”-6”)Max Width: 12 feet,Max Length: 50 feet) |
| AMS-T-9046 | |
| Titanium and Titanium alloy pipe/tube | |
| Commercially pure titanium (CP) | |
| Code designation | Yield strength |
| minimum, ksi 1 / | |
| CP-1 | 70 |
| CP-2 | 55 |
| CP-3 | 40 |
| CP-4 | 25 |
| Alpha titanium alloys(A) | |
| Code designation | Composition |
| A-1 | 5A1-2.5Sn |
| A-2 | 5A1-2.5Sn(ELI) 2 / |
| A-3 | 6A1-2Cb-1Ta-0.8Mo |
| A-4 | 8A1-1Mo-1V |
| Alpha-beta titanium alloys(AB) | |
| Code designation | Composition |
| AB-1 | 6A1-4V |
| AB-2 | 6A1-4V(ELI) |
| AB-3 | 6A1-6V-2Sn |
| AB-4 | 6A1-2Sn-4Zr-2Mo |
| AB-5 | 3A1-2.5V |
| AB-6 | 8Mn |
| Beta titanium alloys(B) | |
| Code designation | Composition |
| B-1 | 13V-11Cr-3A1 |
| B-2 | 11.5Mo-6Zr-4.5Sn |
| B-3 | 3A1-8V-6Cr-4Mo-4Zr |
| B-4 | 8Mo-8V-2Fe-3A1 |
| Processing: | |
| الدرفلة على الساخن | الدرفلة على البارد |
| Available Grades: | |
| الصف الأول الابتدائي | Grade 6Al-2Sn-4Zr-2Mo (6-2-4-2) |
| الصف الثاني الابتدائي | Grade 6Al-4V ELI (Formerly Grade 23) |
| Grade 7 | Grade 6Al-6V-2Sn (6-62) |
| Grade 19 | Grade 8Al-1Mo-1V (8-1-1) |
| Grade 5 (6Al-4V) | Grade 9 (3Al-2.5V) |
| Grade 6 (5Al-2.5Sn) | الصف الثالث الابتدائي |
| Application | |
| الصناعة الكيميائية | Desalination Of Sea Water |
| Petrochemical Industry | الطيران والفضاء |
| Machining Field, Automobile Field | Mobile Phone Component Field. |
| urface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| بكالوريوس | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| Titanium Grade 2 Seamless Pipe | Titanium DIN 3.7035 Seamless Pipe |
| Titanium UNS R50400 Seamless Pipe | |
| Titanium Grade 2 Seamless Pipes | |
| Titanium Alloy Gr.2 Seamless Pipe | |
| ASTM B337 Titanium Grade 2 Seamless Pipe | |
| ASME SB337 Ti Alloy Gr.2 Seamless Pipes | |
| Titanium Grade 2 Welded Pipe | Titanium DIN 3.7035 Welded Pipe |
| Titanium UNS R50400 Welded Pipe | |
| Titanium Grade 2 Welded Pipes | |
| Titanium Alloy Gr.2 Welded Pipe | |
| ASTM B337 Titanium Grade 2 Welded Pipes | |
| ASME SB337 Ti Alloy Gr.2 Welded Pipes | |
| Titanium Grade 2 Round Pipe | Titanium DIN 3.7035 Round Pipe |
| Titanium UNS R50400 Round Pipes | |
| Titanium Grade 2 Round Pipes | |
| Titanium Alloy Gr.2 Round Pipe | |
| Titanium Grade 2 Round Pipe | |
| Ti Alloy Gr.2 Round Pipes | |
| Titanium Gr.2 Seamless Tubes | Titanium DIN 3.7035 Seamless Tubes |
| Titanium UNS R50400 Seamless Tubes | |
| Titanium Grade 2 Seamless Tubing | |
| Titanium Alloy Gr.2 Seamless Tubes | |
| ASTM B338 Titanium Gr.2 Seamless Tubing | |
| ASME SB338 Ti Alloy Grade 2 Seamless Tubes | |
| Titanium Grade 2 Welded Tubes | Titanium DIN 3.7035 Welded Tubes |
| Titanium UNS R50400 Welded Tubes | |
| Titanium Grade 2 Welded Tubing | |
| Titanium Alloy Gr.2 Welded Tubes | |
| ASTM B338 Titanium Grade 2 Welded Tubing | |
| ASME SB338 Ti Alloy Gr.2 Welded Tubes | |
| Titanium Grade 2 Round Tubes | Titanium DIN 3.7035 Round Tubes |
| Titanium UNS R50400 Round Tubes | |
| Titanium Grade 2 Round Tubing | |
| Titanium Alloy Gr.2 Round Tubes | |
| Titanium Grade 2 Round Tubing | |
| Ti Alloy Gr.2 Round Tubes | |
| Titanium Grade 2 Pipe | Titanium DIN 3.7035 Pipe |
| Titanium UNS R50400 Pipes | |
| Titanium Grade 2 Pipe | |
| Titanium Alloy Gr.2 Pipes | |
| Titanium Grade 2 Pipes | |
| Ti Alloy Gr.2 Pipe | |
| Titanium Grade 2 Tube | Titanium DIN 3.7035 Tubes |
| Titanium UNS R50400 Tube | |
| Titanium Grade 2 Tubing | |
| Titanium Alloy Gr.2 Tubes | |
| Titanium Grade 2 Tubes | |
| Ti Alloy Gr.2 Tubes |
Grade 2 titanium tube form (4)
-
Titanium seamless pipe is made by perforating and drawing solid titanium rod, and the hollow part of the pipe is made by perforation or hot extrusion process. Titanium seamless pipe is an ideal choice for very large diameter to wall thickness ratio and has very good external dimension tolerance.
-
Titanium welded pipe is a tubular product made of strip titanium that is roll formed and fusion welded along the longitudinal seam. The welding process used by Daxun Alloy does not use any filler metal during the welding process.
-
Titanium square tubes are drawn from round tubes or round tube billets and can be formed into right angles or rounded corners. They can also be cold extruded, which is efficient and low cost. The only disadvantage is that the tolerance will gradually increase.
-
Tubular products are welded and then re-drawn to final size. Welding and drawing is ideal for producing thick walled, large diameter tubes that cannot be welded directly to size but still offer cost savings over seamless tubes. All Daxun welded and drawn tubes are bright annealed
المعلومات المتاحة للرجوع إليها وتنزيلها
Daxun is a trustworthy Titanium pipe/tube manufacturer
As a professional manufacturer, Daxun ensures superior quality across all its products. Consequently, all our titanium tubes have obtained certifications under multiple international quality standards, including ISO9001, SGS, CE, and OQC.
أحدث مشاريع ومنتجات الحالة الساخنة
المنتجات ذات الصلة (8)
Grade 2 Titanium Tube (UNS R50400 / Werkstoff WS 3.7035)
This is the most often used titanium tube for industrial applications, providing a superb balance of moderate strength and reasonable ductility. It offers excellent corrosion resistance in both highly oxidising and slightly reducing conditions (including chlorides). It provides good corrosion protection in the chemical and offshore industries, as well as aircraft manufacture, where strength and ease of forming are required. It’s also utilised in heat exchangers, hypochlorite systems, fire water systems, ballast water systems, industrial and aerospace components, CPI equipment, and pipes.
Fabrication
Stock Availability
Weight Reduction
Crystal Structure
Grade 2 Titanium Seamless Pipe Manufacturing Process
Grade 2 Titanium Welded Pipe Manufacturing Process
Power Industry Reference List
| الشركة | Project |
|---|---|
| Alstom Power | Calpine Fox Energy |
| Alstom Power | Skikda |
| The Atlantic Group | Savannah Electric Power Kraft #2 |
| Constellation Power | Wagner Station Unit #2 |
| Ecolaire/Yuba Heat Transfer | Connectiv Energy |
| Ellet Industries | — |
| Graham Corp | — |
| Hantech | — |
| High Performance Tube | — |
| Joseph Oat | BP Chemical |
| Larsen & Toubro | TATA Power — UMPP Mundra |
| Salem Tube | — |
| The Atlantic Group | Savannah Electric Power Kraft #2 |
| Tico Titanium | — |
| Titan Metal Fab | BP Chemical |
| Titanium Fabricators | — |
| Tubes Inc. | — |
| Uniti Titanium | — |
| Waterco | — |
| Waterpik Technologies | — |
Our services
- We customise your grade 2 titanium tubes to your specifications, certify them with various certifying organisations (e.g., TÜV Rheinland or DNV), and begin upgrading titanium semi-finished products for the corresponding applications.
- We will be delighted to advise and explain what you need to know when obtaining titanium tubes, as well as which criteria you should pay particular attention to while producing the components.
- If you have long-term delivery responsibilities, you can enter into a framework agreement with Daxun. We guarantee prices and quantities within specified dates.
- Benefit from our extensive knowledge in the worldwide procurement industry. Since 2001, we have served small, medium-sized, and large businesses at home and abroad.
- Have you got any questions? Our service centre would be delighted to answer any queries you have about finished titanium tubes and unusual materials. We look forward to hearing from you.
تعتمد درجة سبيكة التيتانيوم التي تحتاجها على المشروع الذي تعمل عليه، حيث أن لكل درجة فوائد مختلفة.
إنّ جميع درجات سبائك التيتانيوم قوية للغاية ومقاومة للتآكل، مما يعني أنها ستستمر في العمل بشكل جيد في أقسى الظروف.
إن الدرجات الأعلى من سبائك التيتانيوم (5-12) هي سبائك مصممة لفوائد محددة. على سبيل المثال، تتميز سبائك التيتانيوم من الدرجة 12 بمقاومة ممتازة للحرارة، مما يجعلها خياراً مثالياً للمبادلات الحرارية الصدفية والأنبوبية والأنابيب الهيدروليكية ومعدات الصناعة الكيميائية.
الدرجات من 1-4 هي سبائك التيتانيوم النقي، وهي خيار مثالي إذا كنت بحاجة إلى مادة قابلة للحام وقابلة للسحب لأنظمة الأنابيب والأنابيب. ستجد درجات أقل تستخدم في الصناعات البحرية والصناعية.
إذا كنت تبدأ مشروعاً ولست متأكداً من درجة سبيكة التيتانيوم الأفضل لك، اتصل بنا اليوم؛ فنحن سعداء للغاية بمساعدتك.
نقدم في DAXUN مجموعة واسعة من درجات سبائك التيتانيوم من الدرجة 1 إلى الدرجة 12.
الدرجات من 1 إلى 4 هي التيتانيوم النقي، بينما الدرجات الأعلى هي السبائك.
تحظى درجات السبائك بشعبية كبيرة بسبب نسبة قوتها إلى وزنها العالية.
درجة سبائك التيتانيوم الأكثر استخداماً لدينا هي الدرجة 5. وعلى الرغم من أنها لا تزال تحتوي على نسبة عالية من التيتانيوم، إلا أن هذه الدرجة هي الأكثر موثوقية لأنها تتحمل درجات حرارة تصل إلى 600 درجة فهرنهايت وتتحمل الظروف القاسية.
وتفضل الصناعات مثل صناعات الطيران والصناعات البحرية الدرجات الأعلى لمقاومتها للتآكل والتآكل.
وعلى العكس من ذلك، تُستخدم الدرجات الأقل في المقام الأول في اللحام نظرًا لانخفاض قوتها.
To learn more about the differences between different grades of titanium alloy, call +86 13382898899 today to speak directly with our experts.
على الرغم من أن درجة التيتانيوم تزيد من التكلفة قليلاً، إلا أن التكلفة الإجمالية تتحدد في المقام الأول حسب شكل وشكل التيتانيوم الذي تحتاجه.
At DAXUN, we offer a wide range of titanium products, including pipe/tubes, tubes, coils and bars. The length, width and quantity of each item you require will affect the amount you pay at checkout.
لسوء الحظ، من الصعب التوصل إلى سعر عبر الإنترنت دون معرفة الكثير عن مشروعك وما سيُستخدم التيتانيوم من أجله.
لحسن الحظ، فريق خبرائنا موجود دائماً لمساعدتك وتقديم المشورة لك بشأن احتياجاتك من التيتانيوم. من خلال إرسال بريد إلكتروني إلى [email protected]، سنكون قادرين على الرد عليك ببعض النصائح وعرض أسعار دقيق.
احرص على تضمين أكبر قدر ممكن من المعلومات حول درجة وشكل وكمية التيتانيوم التي تحتاجها للحصول على فهم أفضل لاحتياجاتك.
يتمتع فريق العمل في DAXUN بالخبرة والمعرفة والود. وبفضل سنوات خبرتهم الطويلة في هذا المجال، فهم يعرفون كل شيء عن التيتانيوم، بما في ذلك استخداماته وفوائده ودرجاته.
للحصول على تحديثات منتظمة عن التيتانيوم واستخداماته وتطبيقاته في مختلف الصناعات، احرص على الاطلاع على مدونتنا. لقد كتب خبراؤنا أدلة سهلة المتابعة يمكنك الرجوع إليها دائماً عندما تكون لديك أسئلة.
إذا كنت لا تزال تواجه مشكلة، فلا تتردد في الاتصال بنا؛ يسعدنا تقديم المساعدة.
من خلال إرسال بريد إلكتروني إلى [email protected]، ستتلقى رداً سريعاً. تأكد من تضمين أكبر قدر ممكن من التفاصيل في سؤالك حتى نتمكن من التوصية بالحل المناسب.
يُرجى ملء النموذج الموجود في صفحة “اتصل بنا”، أو الاتصال بمدير المبيعات لدينا على “+86 13382898899”، وسوف نتصل بك في أقرب وقت ممكن. واتسابنا على الإنترنت، وسيتم التحقق من البريد الإلكتروني ([email protected]) في غضون 6 ساعات. سيتم الرد على كل استفسار أو رسالة على الفور. بالإضافة إلى ذلك، نشارك معلومات السوق مع عملائنا كل أسبوع
We can provide stainless steel pipe/tube samples for you to check the quality. Sample is free and you just pay the freight.
لقد قمنا بالتصدير إلى أكثر من 42 دولة، مثل كندا، وتشيلي، والكويت، وألمانيا، وكوريا الجنوبية، والمملكة العربية السعودية، وسنغافورة، وغيرها.
Our MOQ is 1 ton for stainless steel pipe/tube.
يمكن تسليم الطلبات التجريبية في غضون أسبوع. بالنسبة للطلبات العادية، يستغرق الأمر أسبوعين تقريباً.