Daxun is a 410 stainless steel sheet supplier in China
As China’s leading stainless steel plate supplier and exporter, Daxun provides 410 stainless steel plates to the world.
- Grade: AISI 410-Martensite
- Manufaktur: pelat canai dingin, pelat canai panas, pelat tempa
- Standar: ASTM, ASME, GB, DIN, JIS, ISO, EN, BS
- Jenis: pelat tipis canai dingin, pelat tebal canai panas
- Permukaan: 2B, NO.1, NO.4, HL, BA, 8K, dll.
- Panjang: 2438mm3048mm6000mm dapat disesuaikan
- Asal: TISCO, Baosteel, Pohang, Tsingshan, Delong
Pemimpin global dalam layanan fabrikasi lembaran baja tahan karat
Martensitic 410 grade stainless steel can be toughened by a “quench and temper” heat treatment, like most non-stainless steels. It contains enough chromium (at least 11.5%) to resist corrosion. It has the highest corrosion resistance when it is polished after tempering and hardening. A general-purpose grade of stainless steel plate called 410 grade is usually hardened, but still machinable, and is used in applications that require moderate heat and corrosion resistance and high strength. The high hardness of martensitic stainless steel is its main feature, but some other characteristics are sacrificed. Poor weldability must be accommodated during manufacturing, and a final heat treatment is usually required. Martensitic stainless steels have lower corrosion resistance than ordinary austenitic stainless steels. They also lose ductility at temperatures below freezing and lose strength at temperatures above freezing due to over-tempering, which limits their useful operating temperature range. 410 alloy stainless steel plate is a widely used 12% chromium martensitic stainless steel plate that can be heat treated to produce a range of mechanical properties. 410 stainless steel plate has high strength and hardness while having good corrosion resistance. 410 Alloy Stainless Steel Plate is ductile and malleable. It is magnetic in all circumstances. Therefore, it is not recommended for use where severe corrosion may occur.
Stainless steel 410 plates are used in many different commercial applications. To meet the needs of their customers, Daxun Alloys producers acquire stainless steel plates in specified sizes and specifications. Because of the special qualities of 410 grade stainless steel, stainless steel plates can be used in steam, mild, and chemical environments. When stainless steel passes numerous, exacting quality tests, these qualities become highly valuable.
As a result, making sure the material is checked prior to delivery is crucial. Daxun Alloys carries out the required testing for any kind of application.
Data Teknis
- Parameter
- Komposisi Kimia
- Sifat mekanik
- SIFAT FISIK
- Standar
| Product Parameters: Stainless Steel Sheet/Plate | |||
| Lebar | 10mm ~ 2500mm | ||
| Ketebalan | 0.2mm ~ 100mm | Toleransi ketebalan | +/- 0,03mm |
| Standar | ASTM/ASME 240/480, JIS 4305, DIN EN 10088-2 | ||
| Permukaan | 2B, BA, 8K, NO.1, NO.4, NO.3, garis rambut, kotak-kotak, emas, hitam, emas mawar, dll | ||
| spesifikasi | 1000*2000/L,1219*2438/L,1250*2500/L,1500*3000/L1500*6000/L,1800*6000/L,2000*6000/L2200*6000L | ||
| Asal Pabrik | TISCO, ZPSS, BAOSTEEL, JISCO, ZSESS, ATI, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu, dan lain-lain. | ||
| Sertifikasi | ISO, SGS, BV, TUV, CE, dll | ||
| UNS No | S41000 |
| EN | 1.4006 |
| AISI | 410 |
| Karbon (C) | 0.08/0.15 |
| Silikon (Si) | 1 |
| Mangan (Mn) | 1 |
| Fosfor (P) | 0.04 |
| Belerang (S) | 0.03 |
| Kromium (Cr) | 11.5/13.5 |
| Molibdenum (Mo) | |
| Nikel (Ni) | 0.75 |
| Nitrogen (N) |
| Properti | Nilai |
| Kepadatan | 7.8 g/cc |
| Kekuatan Hasil | 1,225 MPa at a strain of 0.2% |
| Kekuatan Tarik Tertinggi | 1,525 MPa |
| Kekerasan | 126–192 Brinell hardness (annealed condition) 201–255 Brinell hardness (when hardened and tempered) |
| Bulk Modulus | 200 GPa |
| Titik Leleh | 1,480–1,530 °C |
| Ketahanan Korosi | Good corrosion resistance in mild atmospheric environments, water, and some mild chemical environments. It shows pitting corrosion and brown staining in salt water conditions and offers lower resistance to acidic environments than the austenitic stainless steel alternatives. |
| Magnetism | Permeability 700–1,000. Highly responsive to magnetic fields, act as a strong magnetic flux carrier due to its martensitic structure. |
| Kepadatan (lb./ in^2) @ RT | 0.28 | |
| Modulus Elastisitas dalam Ketegangan (psi x 10^6) | 29 | |
| Panas Spesifik (BTU/o F/lb.) | 32 hingga 212 oF | 0.11 |
| Konduktivitas Termal (BTU/jam/ft^2/ft) | 212oF | 14.4 |
| 932oF | 16.6 | |
| Koefisien Ekspansi Termal Rata-rata (dalam. x 10^-6 per o F) | 32 hingga 212oF | 5.5 |
| 32 to 1,200oF | 6.5 | |
| Resistivitas Listrik (mikro ohm - cm) | pada suhu 70oF | 22.5 |
| UNS S41000 | ASTM A 276 |
| AMS 5504 | ASTM A 493 |
| AMS 5613 (Chemistry only) | ASTM F 899 |
| ASTM A 240 | ASME SA 240 |
| EN 1.4006 | B50991B |
| PWA-LCS | GE Aviation S-SPEC-35 AeDMS S-400 |
| GE Aircraft Engine (GT193) | RR SABRe Edition 2 |
Pilih Daxun dan buat pelanggan Anda puas.
Pengiriman cepat
We provide timely and fast delivery of stainless steel products for customers with urgent needs. Behind the speed is the system support from information flow to logistics and capital flow. For example, in terms of information flow, Daxun’s order data is pushed to the logistics system in real time, and the data is seamlessly connected; in terms of logistics, the processing center is close to highways and rivers and seas, with reasonable scheduling, rapid response, storage and transportation linkage, and efficient loading, ensuring that the task is completed on schedule.
410 plate features
Ketahanan Korosi
410 is resistant to dry air, fresh water, mild bases and acids, foods, steam and hot gases.
It must be hardened for maximum heat and corrosion resistance. Best performance when smooth.
Heat Resistance
Good resistance to scaling up to about 650°C, but not generally recommended for use at temperatures between 400 and 580°C as mechanical properties are reduced.
Perlakuan Panas
Fully anneal 815-900°C, slow furnace cool to 600°C, then air cool.
Process anneal 650-760°C and air cool.
Welding
Easily welded by all standard methods, but requires preheating to 150-260°C and post weld annealing to reduce the likelihood of cracking.
Stainless Steel 410 Applications
- Aerospace structures;
- Automobile exhaust pipes, engine parts;
- Medical devices;
- Knives and kitchen utensils;
- Petrochemical applications;
- Stainless steel cutlery, kitchen utensils;
- Manufacturing flat springs;
- Hand tools;
- Bolts, nuts, springs and fasteners;
Kualitas, pengiriman, inspeksi
- Daxun juga melakukan beberapa tes jaminan kualitas. Pengujian ini meliputi uji perataan, uji lubang dan ketahanan, uji mekanis, uji kekerasan, identifikasi positif material, uji ekspansi, dll. Semua pengujian ini memastikan bahwa bahan tersebut cocok untuk aplikasi yang dibutuhkan.
- Selama proses produksi, kami mengukur diameter, ketebalan, dan permukaan produk. Waktu pengiriman standar kami adalah 7-15 hari, kecuali untuk beberapa produk ukuran khusus, waktu pengiriman kami akan bertambah menjadi 20 hari.
Waktu pengiriman kami benar-benar sesuai dengan kontrak. - Mendukung agen pihak ketiga pelanggan untuk pergi ke pabrik untuk pemeriksaan
- Mendukung sampel gratis kepada pelanggan untuk pengujian
- Mendukung inspeksi pabrik di tempat atau video
SS 410 Plate Surface Treatment
1D: Permukaannya matte dengan bentuk partikel yang terputus-putus.
2D: Putih dengan nada keperakan.
2B: Abu-abu perak dengan kilap dan kerataan yang lebih baik daripada permukaan 2D.
Ba: Dekat dengan permukaan cermin dengan kilap dan daya pantul yang istimewa.
No.3: Kilauan yang bagus dan permukaan yang kasar.
No.4: Permukaannya memiliki garis-garis halus dan kilap yang bagus.
HL: Abu-abu perak dengan rambut keemasan.
8K: Permukaan cermin.
PENGOLAHAN
Jika Anda memerlukan bantuan teknis tambahan, ahli metalurgi dan staf kami yang berpengetahuan luas akan dengan senang hati membantu. Selain itu, Daxun memiliki laboratorium pengujian bersertifikat-yang pertama dalam industri inventaris multi-logam dan plastik. Ini, menurut pendapat kami, menunjukkan dedikasi kami yang tak tergoyahkan terhadap kualitas dan filosofi kami sebagai pemasok layanan penuh.
410 plate stainless steel Features
Daxun Biarkan merek Anda meningkat dengan cepat
- Galeri
- Toleransi
- Status pengiriman
- Seri produk lainnya
| Toleransi untuk Lembar 2B | |||
| Ukuran | Peringkat Toleransi | ||
| Kelompok 1 | Kelompok 2 | Kelompok 3 | |
| 0.4 | 0.3 ~ 0.32 | 0.33 ~ 0.37 | 0.37 ~ 0.39 |
| 0.5 | 0.4 ~ 0.42 | 0.43 ~ 0.47 | 0.47 ~ 0.49 |
| 0.6 | 0.5 ~ 0.52 | 0.53 ~ 0.56 | 0.57 ~ 0.59 |
| 0.7 | 0.6 ~ 0.62 | 0.63 ~ 0.67 | 0.67 ~ 0.69 |
| 0.8 | 0.7 ~ 0.72 | 0.73 ~ 0.77 | 0.74 ~ 0.79 |
| 0.9 | 0.8 ~ 0.82 | 0.83 ~ 0.87 | 0.87 ~ 0.89 |
| 1 | 0.89 ~ 0.9 | 0.91 ~ 0.94 | 0.94 ~ 0.99 |
| 1.2 | 1.02 ~ 1.08 | 1.09 ~ 1.15 | 1.16 ~ 1.18 |
| 1.5 | 1.32 ~ 1.38 | 1.39 ~ 1.45 | 1.46 ~ 1.48 |
| 2 | 1.72 ~ 1.79 | 1.8 ~ 1.86 | 1.87 ~ 1.9 |
| 2.5 | 2.23 ~ 2.36 | 2.32 ~ 2.42 | 1.42 ~ 1.47 |
| 3 | 2.7 ~ 2.77 | 2.78 ~ 2.82 | 2.85 ~ 2.9 |
| Toleransi untuk Pelat Canai Panas No.1 | |||
| Ukuran | Peringkat Toleransi | ||
| Kelompok 1 | Kelompok 2 | Kelompok 3 | |
| 3 | 2.6 ~ 2.75 | 2.75 ~ 2.85 | 2.86 ~ 2.9 |
| 4 | 3.5 ~ 3.6 | 3.6 ~ 3.75 | 3.76 ~ 3.95 |
| 5 | 4.5 ~ 4.6 | 4.6 ~ 4.75 | 4.75 ~ 4.95 |
| 6 | 5.4 ~ 5.6 | 5.6 ~ 5.75 | 5.75 ~ 5.85 |
| 8 | 7.3 ~ 7.5 | 7.5 ~ 7.65 | 7.65 ~ 7.85 |
| 10 | 9.2 ~ 9.3 | 9.3 ~ 9.6 | 9.6 ~ 9.85 |
| 12 | 11.1 ~ 11.2 | 11.2 ~ 11.6 | 11.6 ~ 11.85 |
| 14 | 13.1 ~ 13.2 | 13.2 ~ 13.6 | 13.6 ~ 13.85 |
| 16 | 15.2~ 15.5 | 15.5~ 15.7 | 15.7~ 16.1 |
| 18 | 17.2~ 17.5 | 17.5~ 17.7 | 17.7~ 18.1 |
| 20 | 19.2~ 19.5 | 19.5~ 19.7 | 19.7~ 20.1 |
| 30 | 29.2~ 29.5 | 29.5~ 29.7 | 29.7-30.1 |
| 40 | 39.2~ 39.5 | 39.5~ 39.7 | 39.7~ 40.1 |
| 50 | 49.2~ 49.5 | 49.5~ 49.7 | 49.7~ 50.1 |
| 60 | 59.2~ 59.5 | 59.5~ 59.7 | 59.7~ 60.1 |
| Pilihan Status Pengiriman | Kondisi Permukaan |
| Digulung Dingin | 2B |
| 2D | |
| BA | |
| Garis rambut | |
| No.3 | |
| No.4 | |
| 6K | |
| 8K | |
| Catatan: | |
| 1. Jika Anda memerlukan status pengiriman yang berbeda dari yang tercantum di atas, mohon konfirmasi dengan kami. | |
| 2. Jika ada pertanyaan atau pesanan, mohon beritahukan kepada kami persyaratan tambahan yang tidak disebutkan di sini. | |
| Status Pengiriman | |
| Pilihan Status Pengiriman | Kondisi Permukaan |
| Canai Panas | No.1 |
| No.3 | |
| No.4 | |
| 6K | |
| 8K | |
| Acar | |
| Catatan: | |
| 1. Jika Anda memerlukan status pengiriman yang berbeda dari yang tercantum di atas, mohon konfirmasi dengan kami. | |
| 2. Jika ada pertanyaan atau pesanan, mohon beritahukan kepada kami persyaratan tambahan yang tidak disebutkan di sini. | |
| Kelas | Jenis | Ketebalan | Permukaan |
| Austenitik | 304/304H/304L/304J1 | 0,25-150mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| 321 | 0,4-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| 316/316L/317L/316Ti | 0,3-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| Ferit | 430 | 0.4-3.0mm | 2B/BA/NO.4/8K/SB/HL |
| Ferit Ultra Murni | 443 | 0.4-2.0mm | 2B |
| 436L/439/444/441 | 0.5-3.0mm | 2B 、 2D | |
| 409L | 0,4-2,5 mm | 2B 、 2D | |
| Kelas | Jenis | Ketebalan | Asli |
| Baja tahan panas | 309S | 0,5-40mm | CHN |
| 310S | 0,5-40mm | CHN | |
| Baja Dupleks | 2101 | 1,5-50mm | CHN |
| 2304 | 3.0-50mm | CHN | |
| 2205 | 0,5-60mm | CHN | |
| 2507 | 1.0-60mm | SWE / JPN / CHN | |
| Baja Austenitik Super | N08904 | 0,6-50mm | SWE / JPN / CHN |
| S31254 | 0,5-50mm | SWE / JPN / CHN | |
| N08926 | 0,5-50mm | SWE / JPN / CHN | |
| N08367 | 0,5-50mm | SWE / JPN / CHN | |
| Paduan Dasar Nikel | N08031 | 1.0-50mm | AS / JPN / GER |
| N08810 / N08800 | 0,8-50mm | AS / JPN / CHN | |
| N08028 | 1.0-20mm | AS / JERMAN / JPN | |
| N08020 | 1.0-20mm | AS / JERMAN / JPN | |
| N08825 | 0,8-40mm | US / GER / SWE / JPN / CHN | |
| N10276 | 0,5-50mm | AS / JERMAN / JPN | |
| N06022 | 1.0-50mm | AS / JERMAN / JPN | |
| N06625 | 0,8-20mm | AS / GER / CHN | |
| N04400 | 1.0-20mm | AS / JERMAN / JPN | |
| N06600 | 1.0-50mm | US / GER / JPN / CHN | |
| N02201 | 0,5-20mm | AS / JPN | |
| Titanium | TA1/Gr1 | 0,5-50mm | JPN / CHN |
| TA2/Gr2 | 0,5-50mm | JPN / CHN | |
| Bahan Pengelasan | ERNiCrMo-13 | 1.2 、 2.4mm | GER |
| ERNiCrMo-3 | 2.4mm | GER | |
| ERNiCrMo-4 | 2.4mm | AS |
The surface and shape of 410 stainless steel plate (7)
-
410 stainless steel hot-rolled plate, the surface is pickled original color, industrial use, pressure vessels, etc.
-
410 Stainless Steel Finish #4 is perfect for kitchen appliances, countertops,handrails, and more. Our sheets can be cut to size and easily ordered online.
-
Lapisan Bright Annealed (BA) adalah baja tahan karat canai dingin yang telah dianil dalam atmosfer yang terkendali untuk mempertahankan permukaan yang sangat reflektif.
-
410 stainless steel 2B surface treatment is a mill surface treatment with a smooth surface, and the color of 321 stainless steel plate 2B surface treatment is light gray.
-
410 Stainless Steel Plate #8 Mirror has a non-directional surface finish that almost looks like a mirror. Mirror has a highly polished surface finish.
-
Pelat bermotif baja tahan karat adalah permukaan yang dibentuk dengan cara menekan atau menggulung pelat datar baja tahan karat dengan panas, juga disebut pelat anti selip.
-
410 stainless steel plate is pressed to form a wavy surface, which is often used for roof panels. This is very common in the construction field.
Informasi yang tersedia untuk referensi dan diunduh
Daxun adalah produsen pelat baja tahan karat yang dapat dipercaya
Sebagai produsen profesional, Daxun memastikan bahwa semua produk yang kami hasilkan berkualitas tinggi. Oleh karena itu, kami memastikan bahwa semua pelat baja tahan karat disertifikasi oleh ISO9001, SGS, CE, OQC, dan lebih banyak standar kualitas internasional, serta memiliki kontrol kualitas yang ketat untuk memastikan bahwa pelat baja tahan karat memiliki lebih sedikit cacat. Di Daxun, yakinlah bahwa semua produk tahan lama, berkualitas tinggi, dan berkinerja tinggi.
Proyek dan produk hot case terbaru
Produk Terkait (13)
Kami dapat menyediakan sampel lembaran baja tahan karat untuk Anda periksa kualitasnya. Sampel gratis dan Anda hanya membayar ongkos kirim.
Kami telah mengekspor ke lebih dari 42 negara, seperti Kanada, Chili, Kuwait, Jerman, Korea Selatan, Arab Saudi, Singapura, dll.
MOQ kami adalah 1 ton untuk lembaran baja tahan karat.
Pesanan percobaan dapat dikirim dalam waktu satu minggu. Untuk pesanan reguler, kira-kira membutuhkan waktu dua minggu.