Daxun is an excellent manufacturer of grade 23 (Ti-6Al-4V ELI）titanium rods and bars.

Daxun has a state-of-the-art production facility in China that produces highly competitive, high-precision Grade 23 titanium bars. Excellent surface, tolerance, straightness and material quality provide you with technological leadership and consistent production processes. These advantages apply to a wide range of diameters and materials. In addition, our comprehensive stock program at our service center enables just-in-time delivery.

ÖZELLİKLER

AMS 4928 – Bars, Forgings, and Forging Stock (Annealed)
AMS 4965 – Bars, Forgings (Solution treated and aged)
AMS 4967 – Bars, Forgings (Annealed, Heat Treatable)

ISI TEDAVİSİ

When high hardness, tensile strength, and fatigue strength are required, annealing can be performed at 1,700-1,900°F (927 – 1,038°C).
DAXUN 6-4™ Grade 23 alloy can be heat treated in a variety of ways:

1. Anneal: 1,275 – 1,400°F (691 – 760°C), ½ to 2 hours, air or furnace cool
2. Stress Relief Anneal: 1,000 – 1,200°F (538 – 649°C), 1 to 8 hours, air or furnace cool
3. Solution Heat Treat: 1,675 – 1,750°F (913 – 954°C), 1 hour, water quench
4. Aging: 975 – 1,025°F (524 – 552°C), 4 to 8 hours – air cool

Çözelti ile muamele edilmiş ve yaşlandırılmış durumda, küçük kesitlerin hızlı su verme işlemi optimum özellikler sağlar. Daha büyük kesit boyutları ve/veya gecikmeli su verme optimum özelliklerden daha azına neden olabilir.

SERTLİK

Typical hardness in the annealed condition is Rockwell C 30-34, and about Rockwell C 35-39 in the solution and aged condition.

Forgeability / Formability

Ti-6Al-4V ELI (Grade 23) alloy bar is forged at 1,750°F (954°C) with a final forging temperature of 1,450°F (788°C). A minimum of 35% reduction is recommended for optimum properties.

Grade 23 alloy bar is difficult to form at room temperature, even in the annealed condition. Therefore, severe forming operations such as bending or stretching can be performed on annealed material at temperatures up to 1,200°F (649°C) without affecting mechanical properties. Hot sizing or forming can be accomplished by creep forming in the range of 1,000 – 1,200°F (538 – 649°C).

İşlenebilirlik

Ti-6Al-4V ELI (Grade 23) alloy bar can be machined using austenitic stainless steel machining methods with slow machining speeds, high feeds, rigid tools, and the use of large amounts of non-chlorinated cutting fluids.

Kaynaklanabilirlik

Grade 23 titanium rod is readily weldable in the annealed condition or in the solution and partially aged condition, with aging being accomplished during post weld heat treatment. Precautions must be taken to prevent contamination with oxygen, nitrogen, and hydrogen. Fusion welding may be performed in an inert gas filled chamber or with inert gas to weld the molten metal and adjacent heated zones, with a tail shield. Spot, seam, and flash welding may be performed without the aid of a protective atmosphere.

Özel Hususlar

Grade 23 titanium alloy rod may be contaminated with hydrogen from improper pickling, and with oxygen, nitrogen, and carbon during forging, heat treating, brazing, etc. This contamination may result in a loss of ductility, which may adversely affect notch sensitivity and forming characteristics.

Size Range

Grade 23 Titanium Bar Dimensions
Ø 0.7 – 30 mm (drawn, ground)
Ø 16 - 400 mm (sıcak haddelenmiş, soyulmuş)
Tolerances: h11–h5 (ISO 286-2)
İstek üzerine daha sıkı veya farklı toleranslar mevcuttur
Çapa bağlı olarak 9.000 mm'ye kadar uzunluklar
Daha büyük çaplar için, diğer çubuk uzunlukları ve toleransları talep üzerine kabul edilebilir

Availability Grade 23 Titanium Rods

Processing options include:

• Çizim, düzleştirme
• Çizim, düzeltme, parlatma
• Çizim, taşlama, parlatma
• Çekme, doğrultma, taşlama, parlatma
• Çekme, tavlama, doğrultma
• Çekme, tavlama, parlatma
• Çekme, tavlama, taşlama, parlatma
• Çekme, tavlama, doğrultma, taşlama, parlatma

İhtiyaçlarınıza göre çubuklar üretiyoruz.
Mükemmel yüzey ve düzlük, mükemmel yuvarlaklık ve en sıkı çap toleransları (ISO 286-2'ye göre h5'e kadar). Düzleştirilmiş, taşlanmış, parlatılmış olarak mevcuttur.

Testere

• Şerit testereler (Ø510 mm'ye kadar)
• Tezgah tipi şerit testereler (6.000 x 3.000 x 400 mm'ye kadar)
• Hassas kesim için yüksek performanslı testere makineleri

Titanium Bar End Machining

• Tek veya çift taraflı
• Pah 90° (45°)
• Nokta 60° (30°)
• Düz uç
• Merkezlenmiş

Delivery Form

• ASTM American Society for Testing and Materials Standards
• AMS American Aerospace Materials Standards
• NACE American Association of Corrosion Engineers International Standards
• ASME American Society of Mechanical Engineers Standards
• GB Chinese National Standards
• GJB Chinese National Military Standards
• ISO International Standards
• DIN German Standards
• EN European Standards
• API American Petroleum Institute Standards

Detection Method

Tahribatsız muayene > 100% testi
Testing methods:

• Eddy current testing / eddy current crack testing
• Kusursuz yüzey (seviye 4)
• Düz dipli delik çapı 0,7 mm ve 0,4 mm
• Blind area can be cut off according to fixed length > Test to the end of the bar
• Tam çap ultrasonik test

Titanyum Çubuk Malzeme Hizmetlerimiz

As an experienced service center, we can tailor your titanium bar material to your specifications, work with various certification bodies such as TÜV Rheinland or DNV to approve the specifications, and initiate the upgrading of titanium semi-finished products to meet appropriate applications.

We will be happy to provide you with a consultation and explain everything you need to know about obtaining Grade 23 titanium bar material, including which standards require greater attention for the components to be manufactured.

If you have a long-term supply commitment, you can establish a framework agreement with Daxun. We guarantee prices and quantities for a specified period.

Benefit from our extensive experience in the global market. We have been helping businesses around the world since 2003. If you need any additional information about Grade 23 Titanium Bar, our professionals will be happy to help you. We look forward to hearing from you.

Sipariş Bilgileri

Purchase orders should include quantity, grade, type or category, API5L reference, thickness, width, length, and any applicable attachments or additional requirements related to chemical composition, mechanical properties, heat treatment, additional testing, manufacturing process, surface coating or end finish. Contact Daxun now, we will reply to your email as soon as possible.