{"id":19461,"date":"2026-08-01T18:00:53","date_gmt":"2026-08-01T10:00:53","guid":{"rendered":"https:\/\/daxuns.com\/?p=19461"},"modified":"2026-08-03T10:46:07","modified_gmt":"2026-08-03T02:46:07","slug":"inconel-600-sheet-plate","status":"publish","type":"post","link":"https:\/\/daxuns.com\/id\/inconel-600-sheet-plate\/","title":{"rendered":"Inconel 600 Sheet and Plate"},"content":{"rendered":"\n
<\/span>\"Inconel
\n\n

UNS N06600 | ASTM B168-19e1 | AMS5540R<\/p>\n\n\n

Flat-rolled Alloy 600 with condition, inspection, and traceability defined before manufacture<\/strong><\/p>\n\n\n

A practical procurement page for engineers buying sheet, plate, cut blanks, and fabricated material.<\/p>\n\n<\/div><\/div>\n\n\n\n

\n\n

Direct answer:<\/strong> Inconel 600 sheet and plate are flat-rolled forms of UNS N06600, a nickel-chromium-iron alloy selected for combinations of heat resistance, oxidation resistance, fabricability, and corrosion resistance. ASTM B168-19e1 is the principal ASTM product specification for Alloy 600 plate, sheet, and strip, while AMS5540R is an annealed aerospace material route with its own dimensional and acceptance requirements.[1][3] DAXUN manufactures Inconel 600 sheet and plate and supplies order-specific cut blanks, finished dimensions, surface condition, inspection, and traceable material documentation.<\/p>\n\n<\/div><\/div>\n\n\n\n

\n
\n\n

MATERIAL IDENTITY<\/p>\n\n\n

UNS N06600 nickel-chromium-iron alloy<\/strong><\/p>\n\n<\/div>\n\n\n

\n\n

FLAT-PRODUCT ROUTE<\/p>\n\n\n

ASTM B168-19e1 with ASTM B906-22<\/strong><\/p>\n\n<\/div>\n\n\n

\n\n

AEROSPACE ROUTE<\/p>\n\n\n

AMS5540R when the drawing and approval basis invoke it<\/strong><\/p>\n\n<\/div>\n<\/div>\n\n\n\n

The grade name alone is not a complete purchase description. A technically usable order must also define the product form, standard and edition, thickness, dimensions, condition, tolerances, surface, inspection, and any fabrication or service-specific requirements.<\/p>\n\n\n\n

Inconel 600 Sheet and Plate at a Glance<\/h2>\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n
Item<\/th>\nProcurement information<\/th>\n<\/tr>\n<\/thead>\n
Alloy<\/td>\nNickel-chromium-iron Alloy 600<\/td>\n<\/tr>\n
UNS designation<\/td>\nUNS N06600<\/td>\n<\/tr>\n
Common product terms<\/td>\nInconel 600 sheet, Alloy 600 sheet, Inconel 600 plate, Alloy 600 plate<\/td>\n<\/tr>\n
Principal ASTM route<\/td>\nASTM B168-19e1, used with the applicable general requirements of ASTM B906-22[1][2]<\/td>\n<\/tr>\n
Aerospace route<\/td>\nAMS5540R for annealed sheet, strip, and plate up to 2.000 in. (50.80 mm), where the drawing or purchase order invokes it[3]<\/td>\n<\/tr>\n
Strengthening mechanism<\/td>\nSolid-solution strengthening and cold work; Alloy 600 is not precipitation hardenable[4]<\/td>\n<\/tr>\n
Manufacturing scope<\/td>\nFlat-rolled sheet and plate, cut pieces, blanks, formed parts, and project-defined finishing and inspection<\/td>\n<\/tr>\n
Documentation<\/td>\nMill test certificate, heat and lot traceability, inspection records, and supplementary test reports when ordered<\/td>\n<\/tr>\n<\/tbody><\/table><\/figure>\n\n\n\n

"INCONEL" is a trademark used for alloys produced under the Special Metals product family. In engineering documents, UNS N06600 and the applicable material specification provide the clearer contractual identity.<\/p>\n\n\n\n

Is Inconel 600 Sheet Different from Inconel 600 Plate?<\/h2>\n\n\n\n

Sheet and plate are both flat-rolled products, but the words should not be used as casual substitutes on a purchase order. ASTM B168 covers plate, sheet, and strip, and ASTM B906 supplies general requirements for these flat-rolled nickel-alloy forms.[1][2] The applicable tolerances, testing provisions, edge condition, flatness expectations, and available manufacturing route can depend on the form and dimensions actually ordered.<\/p>\n\n\n\n

There is no reliable universal thickness number that separates every commercial use of the words sheet<\/em> and plate<\/em>. A buyer should therefore state both the required product form and the actual dimensions. If a drawing calls the item "sheet" but also invokes plate tolerances, the conflict should be resolved before manufacture.<\/p>\n\n\n\n

For a quotation, specify:<\/p>\n\n\n\n