{"id":19359,"date":"2026-07-27T10:17:07","date_gmt":"2026-07-27T02:17:07","guid":{"rendered":"https:\/\/daxuns.com\/?p=19359"},"modified":"2026-07-27T10:17:07","modified_gmt":"2026-07-27T02:17:07","slug":"2205-vs-2507-duplex-stainless-steel-pipe","status":"publish","type":"post","link":"https:\/\/daxuns.com\/de\/2205-vs-2507-duplex-stainless-steel-pipe\/","title":{"rendered":"2205 vs 2507 Duplex Stainless Steel Pipe | PREN & Standards"},"content":{"rendered":"

2205 vs 2507 Duplex Stainless Steel Pipe: PREN, Standards, and Choosing Between Them<\/h1>\n

Einf\u00fchrung<\/h2>\n

The choice between 2205 and 2507 duplex stainless steel usually isn’t about strength. Both are roughly twice as strong as 316L, both resist chloride stress corrosion cracking far better than austenitic grades, and in most product forms both will pass their acceptance tests without complaint. The real question is narrower: how aggressive is the chloride environment, and are you paying for corrosion margin you don’t actually need?<\/p>\n

2507 costs noticeably more than 2205 \u2014 higher chromium, higher nickel, higher molybdenum, higher nitrogen. In warm chlorinated seawater it earns that premium. In a moderately chlorinated chemical line at 60 \u00b0C, it often doesn’t.<\/p>\n

This page covers the grade comparison that applies to any product form \u2014 composition, mechanical properties, PREN, and the selection logic \u2014 and then goes deeper on pipe, because pipe is where specification mistakes get expensive. Three different ASTM standards cover duplex pipe depending on how it was made, and buyers mix them up regularly. If you’re specifying plate, bar, or coil instead, the grade-level sections below apply equally; the standards and fabrication sections are pipe-specific.<\/p>\n

One thing worth flagging up front: if your drawing says “2205,” it may not be specific enough. More on that below.<\/p>\n

\"\"<\/p>\n

What Separates 2205 from 2507?<\/h2>\n

Both are duplex stainless steels \u2014 roughly balanced ferrite and austenite microstructures, which is where the strength and the chloride SCC resistance come from. The difference is alloy content, and the practical shorthand for that difference is PREN (Pitting Resistance Equivalent Number):<\/p>\n

PREN = %Cr + 3.3 \u00d7 %Mo + 16 \u00d7 %N<\/strong><\/p>\n